Maintenance is not required, if cleaning is desired, wash with a mild soap and water followed by a clean-water
rinse.
TEXTURES
Metal is available with a smooth texture or a standard E-5 Stucco embossed
pattern available at extra cost.
LowGloss/Low Sheen
The finish is a full kynar 500/hylar 5000 finish. but is formulated in a low/gloss/Low Sheen in order to minimize
the appearance of oil-canning.
Technical Data for Kynar 500/Hylar
5000 Coating
- Life
Expectancy-20 years exposure-chalk: rating of 8 or better.
- Accelerated Weathering-(ASTM G-23 Type EH) 5,000
hours-chalk: rating of 8 or better.
- Chemical/Acid Pollution
Resstance-(ASTM D 1808)-Pass
- Formability-(ASTM D 3281 and ASTM D 1737) can be formed without film fracture using normal metal shop practices to a 1 to 2-
T bend radius.
- Gloss-30+5 at 60 degrees(low gloss/sheen available).
- Adhesion-(ASTM D 3359 and NCCA procedure No.11-5)-Pass.
- Impact Resistance-(ASTM D 2794 AND NCCA Technical Bulletin No. 11-6)-70 inch/lbs.,no
tape pick-off.
